U-Pro Hybrid 2.0
Hamaton’s universal U-Pro Hybrid 2.0 sensor is the next generation in TPMS - it is the only TPMS sensor available that provides dual frequency, configurable and programmable technologies with dual valve option.
HTS-A66DD
Hybrid 2.0 Dual Valve Dual-Frequency Sensor
U-Pro Hybrid 2.0 Sensor The only single SKU solution. A dual frequency, configurable and programmable TPMS sensor with dual valve... (more)
Barcode: 713012022235
Comparative Part Numbers: 21360, 5624132
HTS-A66DG
Hybrid 2.0 Snap-In Dual-Frequency Sensor
U-Pro Hybrid 2.0 Sensor The only dual frequency, configurable and programmable TPMS sensor. 97% of direct TPMS-enabled vehicle c... (more)
Comparative Part Numbers: 5624128, PREM-ONE
HTS-A66DH
Hybrid 2.0 Clamp-In Dual-Frequency Sensor
U-Pro Hybrid 2.0 Sensor The only dual frequency, configurable and programmable TPMS sensor. 97% of direct TPMS-enabled vehicle c... (more)
Comparative Part Numbers: 5624130
HTS-A66DK
Hybrid 2.0 Black Clamp-In Dual-Frequency Sensor
U-Pro Hybrid 2.0 Sensor The only dual frequency, configurable and programmable TPMS sensor. 97% of direct TPMS-enabled vehicle c... (more)
Comparative Part Numbers: 21360DK, 5624134
6-152F
Box Of 10 Service Kits for U-Pro and OE-R Sensors
A box of 10 service kits, with each including: 1 nut, 1 rubber grommet, 1 plastic washer, 1 valve cap and 1 valve core. This ser... (more)
Comparative Part Numbers: 72-20-528, T72-20-528
6-230BK
Box Of 10 Replacement Black Clamp-In Valves for U-Pro and OE-R Sensors
A box of 10 black clamp-in valves, with each including: 1 valve stem, 1 nut, 1 rubber grommet, 1 plastic washer, 1 valve cap and 1... (more)
Comparative Part Numbers: 72-20-469, 21264, T72-20-469
6-230T
Box Of 10 Replacement Clamp-In Brass Valves for U-Pro and OE-R Sensors
A box of 10 brass clamp-in valves, with each including: 1 valve stem, 1 nut, 1 rubber grommet, 1 plastic washer, 1 valve cap and 1... (more)
Comparative Part Numbers: 72-20-424, T72-20-424
6-207
Box Of 10 Replacement Snap-In Valves for Schrader Rev 4
A box of 10 snap-in valves. These valves are self-threading and suitable for use with Schrader gen 4 type sensors.a box of 10 sn... (more)
